2573 SHQ 1112D 1.2m
!!<


Silver-plated oxygen-free copper

Phono to Phono


A phono - phono lead can be used for different applications.

To use a Phono - Phono for standard video connections (Composite) the phono lead used should have an impedance of 75ohm's. If a 50 Ohm cable is used results will not be as good.

A high quality phono lead can also be used to pass digital sound in this scenario the digital sound will be Coaxial digital.

This will allow multi-channel sound to be passed from a DVD player (if equipped with a coaxial output) to a multi-channel amplifier.

Unlike S-Video and RGB the composite video signal must accommodate the complete picture signal
through one channel.



Typical use

ANY VIDEO SOURCE WITH A PHONO VIDEO OUTPUT TO AMPLIFIER OF TV.

ALSO FOR DIGITAL COAXIAL CONNECTIONS BETWEEN DVD TO AV AMP/DIGITAL TV.



Top tip


Add an extra dimension to your home set up by using multi-channel sound for that overall cinema experience.

This can be can be achieved by purchasing a Multi-Channel AV amplifier.

Remember always use quality cables for best results.



Connections:



>!!

Professional quality, digital phono to phono lead
- Silver-plated oxygen-free copper (SPOFC)
conductor
- 24k gold-plated plugs
- Metal assembled connectors
- PE foam dielectric
- Silver-plated OFC braiding
- 6mm diameter